-40%
Speedway Motors Black Poly Round Drum Fuel Tank Cell, 10 Gallon, 10 x 30 Inch
$ 68.1
- Description
- Size Guide
Description
This polyethylene tank is an economical way to install a gas tank in your ride, 10" diameter and 30" length has a capacity of 10 gallons, Chrome mounting brackets are included to simplify installation, 1/4" NPT female threaded fuel outlet is molded into the bottom center of the tank, Screw on gas cap is includedBlack Poly Fuel Tank, 10 Gallon, 10 x 30 Inch
Sku # 91076210
Mfr. Part # 91076210
Condition
New
Brand
Speedway Motors
Sold
Each
Details
Info
These black poly gas tanks include chrome mounting brackets, a screw-on cap and a 1/4" NPT threaded outlet molded into the bottom. Care should be taken to not over-tighten fitting.
Item Details
10" x 30"
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
California Customers: This part has been identified as emissions sensitive and can only legally be installed on race-use only vehicles, off-road-use only vehicles, or pre-1965 vehicles in the State of California in accordance with the California Air Resource Board (CARB) requirements. Once your order is placed you will be contacted by Speedway Motors within 2 business days so that you can certify that you will only use such parts on these types of vehicles in California.
Specs
Sold in Quantity
Each
Finish
Natural
Color
Black
Material Type
Polyethylene
Outlet Fitting
1/4" NPT
Hardware Included
Yes
Fuel Pump Included
No
Sending Unit Included
No
Overall Height
10.00
Overall Width
10.00
Overall Length
30.00
Overall Diameter
10
Fuel System Type
Carbureted
Capacity
10
Fuel Tank Style
Spun/Round
Tank Straps Included
Yes
MFG. Part #
91076210
Fuel Capacity Range
10.00-14.99 Gallons
Reviews
Yes I would buy and recommend to all my tail buggy builders
Rated
by Bee jay on June 03, 2020
Summary:
I don't have to worry about sand and mud on the tank outer surfaces
Pros:
It's perfect for dune buggy application
I would buy this again
Rated
by Hammer 517 on May 12, 2018
Summary:
Needed an extra tank for my modified tractor. This was exactly what I needed.
Yes, I recommend this product.
I would buy this product again
Rated
by J from Village Customs on May 14, 2017
Summary:
Tank is easy to install. Brackets make final Fab easy
Pros:
Versatile
Yes, I recommend this product.
I have bought this product and have used them several times.
Rated
by Willy on April 23, 2017
Summary:
Easy to install with the adjustable brackets pervided
Pros:
Easy To Set Up
Easy To Store
Increases Efficiency
Low Power Requirements
Perfect for a hot rod with limited space.
Rugged Construction
Versatile
Yes, I recommend this product.
Fuel tank
Rated
by Srw on March 22, 2016
Summary:
Good quality and not expensive
Yes, I recommend this product.
Related Items / Suggested Parts
Black Poly Fuel Tank, 12 Gallon, 10 x 36 Inch
Black Poly Fuel Tank, 13.5 Gallon, 10 x 40 Inch
Spun Aluminum Fuel Tank, 9-1/2 Gallon, 10 x 28-1/2 Inch
Spun Aluminum Fuel Tank, 11 Gallon, 10 x 33 Inch, Centered Outlet
Straight Chrome Fitting, 3/8 Inch Hose to 1/4 Inch NPT
Chrome 90 Adapter Fitting, 3/8 Inch Hose to 1/4 NPT
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.