RARE Upgraded VFC AKMN Airsoft AEG

Description

RARE Upgraded VFC AKMN AEG. Condition is "Used". Shipped with UPS Ground.
-
Very rare VFC AKMN, these are the best aks you can buy as the externals far surpass LCT or E&L in quality. The reciever steel is all good quality stamped steel (not mild pot steel) and the outer barrel is 7075 T6 aluminum, which makes the rifle incredibly well balanced and wieldable. All of the furniture is real wood except the plastic grip. Inside the parts list is as follows:
- LCT brass barrel
- Lonex V3 hopup with a flathopped prommy purple and flat nub
- A vented 28TPA Starwei motor
- Lonex helical bevel and pinion
- SHS 12:1 chromoly spur and sector gears
- SHS FMR piston with a maxx piston head
- BTC Chimera MK III (bluetooth)
- VFC polished brass cylinder with an SHS cylinder head
- Guarder or APS ball bearing spring guide.
- Everything has been shimmed, aoe corrected, radiused, etc.
Shoots about 1.4j with hop off with .3s currently. If you replace the nozzle for a better one and put in a 6.01 inner barrel I would bet it would be closer to ~1.6j, especially if rhopped.
Comes with 2 VFC stamped steel 7.62 style midcaps.
Issues: Front sight is missing 1 barrel pin and the muzzle device detent, these are pretty easy to get however and it will accept real ones. The mock gas tube latch on the rear sight post is loose, this is a common issue with early vfc aks and can be fixed by heating the left side and peening it outwards (I dont have the tooling to do this without damage). It is missing its fake cleaning rod. The last thing has to do with the BTC chimera: Only one of the selector switches is working, which means its soft semi-locked. The selector can be programmed to do anything such as semi ramping, which would allow semi and full auto on one selector setting.
If you have any questions about this AEG please message me. I am more than happy to answer questions or change some parts around before you buy it.