Agilent (HP) E1369A VXI Card for HP 75000 RF Switch Driver NEW (VXI B-Size)

Description

ACT Auctions
Agilent (HP) VXI 75000 E1369A 18GHz Microwave Switch Driver
New old stock / Comes with calibration data
Current Agilent Product - MSRP 92
•    1-Slot, B-size, register based
•    Signal switching from dc to 26.5 GHz
•    Drive three internal 50 Ω terminated switches
•    Drive two additional external switches
•    Select internal or use external energizing voltages
•    Use equivalent switches of other manufacturers
This auction is for an E1369A Switch Driver.  It allows you to use a VXI 75000 series B controller to control the function of three Agilent RF switches per E1369A.  Each 75000 series B will fit and control 7 of these cards allowing a matrix of 21 switches total.
We have multiple units with and without the face plate.  This auction is for the units with the faceplate.  If you would like a board or multiple boards without the face place and manual at a discounted price, contact us directly and we can setup a private auction for you.
We have a number of the 1369A's pictured here new in the box.   We also have a wide range of new Agilent microwave switches ranging from 4 to 26GHZ.   If someone needed to create an elaborate switch matrix this would be a great solution  Please contact us on availability of these items.  We can put together a package in a private auction to meet your needs.
We also have a wide range of GPIB equipment to interface the controller to your computer.  Again this auction is only for one E1369A Card.
Characteristics:
The E1369A Microwave Switch modules provide switching of up to three microwave coaxial switches or channels. The HP E1369A Microwave Switch is a 3 channel, single-pole, double-throw coaxial switch module. The module panels are numbered 00, 01, and 02 to indicate the channel number of each coaxial switch installed. The HP E1369A Microwave Switch Driver is identical to the HP E1368A, except the coaxial switches are not installed.
The module panel has three cutouts and various mounting holes that allow the user to install up to three 3-port, 4-port, or 5-port, 42Vpk drive level coaxial switches. Drive level voltage can be internal (+5 and +12Vdc) or external (42Vpk). The module panel is numbered 00, 01, and 02 to indicate the channel number of each coaxial switch. Channel 03 and 04 are not labeled on the panel. Up to five coaxial switches can be controlled (e.g. three internal, two external; five external; etc) using the 14-pin connector.   This unit turns the HP 75000 into a switch.
Additional Specs & Manual Available Here
Data Sheet Available Here
Equipment Notes:
This is a great alternative to the 11713A/B/C and is pretty much a 11713A/B/C on steroids.  We have a wide range of NEW 50 ohm and some 75 ohm switches ranging from 4 to 26.5 GHz allowing for a wide range of configurations to fit your needs.
This unit is brand new comes with the manual, Certificate of Calibration & 0515-1373 Parts. The 75000 Series B mainframe is pictured in the final photograph but is not included.
WE HAVE MORE OF THESE AVAILABLE TO THE HIGH BIDDER.  PLEASE CONTACT US IF INTERESTED.
Warranty:
This item is sold with a 14 Day Satisfaction Guarantee. So bid with confidence.
We want you to be happy with your purchase, and as our many customers will be glad to tell you, we will do our very best to resolve any customer problems; however our official policy is as follows:
-All returns must be arranged within fourteen (14) days or receipt of the item.
-All warranties are void if the calibration or warranty seals are broken.
-The item must be returned in the same condition as shipped, with all boxes and packing materials in the original shipping boxes or other shipper approved container.
-Refunds are for the purchase price of the item only. The customer is responsible for all shipping charges on returns.
-Foreign Buyers please be aware we offer no warranty or returns for items shipped outside the USA.
-All internal and external parts are documented in detail. Board swapping, high grading and other forms of return fraud will be dealt with harshly.
Payments & Shipping:
Payments accepted are PayPal only. No international buyers unless PayPal verified. Please feel free to contact us if you need other arrangements.
We will make every effort to ship your item within 24 hours of receipt of your cleared payment on business days (Monday thru Friday excluding holidays). We ship with Fed Ex and UPS only. We will be glad to ship with other carriers by shipping on the purchaser's shipping account. For rate research, our shipping address is Boulder, CO 80305.
Many of our auctions have a set packing and shipping fee. This set fee makes the transaction easier and allows the purchaser to send payment at once without having to wait for a shipping total. Please consider the total with shipping when bidding.
Foreign Buyers & Problem Bidders:
Items sold outside the USA are sold as is with NO WARRANTIES of any kind.
We expect all international buyers to be responsible for arranging their own shipping. In some certain situations with higher value items we may assist you with shipping your item but do not be shocked by our rates. We are a small engineering company and do not have the time or manpower to research international shipping rates & requirements. We have no problem bringing the package to a Local FedEx Kinkos or similar location provided the buyer arranges everything and we can just drop it off. International buyers with less than 10 feedback rating need to contact us prior to bidding. All items will be held before shipping until funds have fully cleared.
Bidders with no feedback or less than 80% positive feedback must contact us through the eBay email system before placing a bid. We will reply through the same system, documenting that you have been approved to bid. If you do not follow these procedures, your bid will be cancelled. All other bidders; bid with confidence.
Payment must be made within four business days (Monday-Friday excluding holidays) of the close of the auction unless you have made special arrangements with us.
About Us:
Ascent Concepts and Technologies is an American owned research and development laboratory. We broker used and surplus equipment from the companies and institutions we work with and act as application specialists for their new equipment needs. We are now offering quality used equipment to the public with the same level of professionalism and service.
Although we do not offer NIST traceable calibration services, we do have extensive in-house calibration equipment and make every effort to verify performance of the equipment we sell.
Please feel free to call Thomas Knox at 1-303-554-0307 with any questions.