1987-1995 JEEP WRANGLER YJ 20 GAL POLYETHYLENE PLASTIC FUEL GAS TANK, BRAND NEW

Description

PLEASE READ BEFORE ORDERING. ORDERING INDICATES YOU HAVE READ DESCRIPTION
PLEASE CONTACT ME BEFORE YOU ORDER TO SEE HOW LONG A WAIT
DUE TO PANDEMIC WE HAVE SEEN DELAYS IN SHIPPING FOR WEEKS ON MANY TANKS
SHIPPING DELAYS COULD BE 2 WEEKS SO ASK BEFORE ORDERING
NOTE: MANY SELL THIS TANK BUT DON'T GIVE YOU THE DETAILS I DO....
THERE MAYBE A DELAY IN SHIPPING THESE OUT. IF NEEDING YESTERDAY PLEASE CONTACT ME FIRST TO GET AN ESTIMATE ON TIME (CONTACT INFO BELOW). HAVE MARKED SHIPPING DELAY IN HANDLING TIME
NOTE: THERE HAS BEEN AN ISSUE WITH FIT.
PLEASE SEE INFO BELOW FOR DETAILS...
IT'S A LOT OF READING BUT AN EDUCATED CONSUMER NOW IS LESS HEADACHES FOR ME LATER...
SOME MAY NEED A NEW SKID PLATE AS WELL AS THE TANK. SOME MAY NEED A NEW SENDER OR MODIFY OLD ONE. CALL BEFORE ORDERING TO GET EXPLANATION. WE WANT TO GET THE RIGHT PART TO YOU THE FIRST TIME OR LET YOU KNOW WHAT YOU NEED TO DO TO GET THIS TANK TO FIT. THERE IS ONLY 1 REPLACEMENT TANK & THIS IS IT. ALL OTHERS SELL THE SAME TANK BUT DON'T TELL YOU ABOUT A POSSIBLE FIT ISSUE.
CALLS TO 847-9715223 WILL TRY TO ANSWER YOUR QUESTIONS BUT WE RUN INTO A NEW PROBLEM ALMOST DAILY. I HAVE SOLD HUNDREDS OF THESE TANK. MOST GO IN WITHOUT A PROBLEM BUT YOU NEED TO BE INFORMED. A NEW SKID PLATE IS EXPENSIVE & HAS SOLVED ANY FIT ISSUES BUT IT'S MORE OF AN EXPENSES YOU NEED TO KNOW ABOUT......
OTHER RECENT ISSUES FROM A TECHNICIAN WHO JUST INSTALLED A TANK FEB. 20, 2015 :: TOP OF TANK GROMMETS FIT TIGHTER DUE TO THE THICKNESS OF THE NEW TANK. THEY DO FIT BUT ARE TIGHTER..... THE NEW STRAPS USE A BOLT TO SECURE TO THE SKID PLATE ON ONE END. THIS MAY NEED A LITTLE MODIFICATION BECAUSE IT MAY HIT THE FRAME. YOU MAY NEED TO SHIM DOWN THE SKID TO CLEAR OR GRIND OUT A LITTLE AREA SO BOLT HEAD CLEARS... IF YOUR OLD SENDER HAS A REINFORCEMENT PLATE IT IS RECOMMENDED TO USE IT TO DISPERSE HOLDING THE SENDER IN PLACE ON THE NEW TANK, BUT THEN YOU MUST USE THE LONGER STOCK BOLTS FROM YOUR OLD TANK. THE NEW BOLTS WITH TANK MAYBE TOO SHORT IF USING THIS PLATE ON THE NEW TANK.... THIS INFO IS SOME OF THE ISSUES WE HAVE RUN INTO SO YOU HAVE NO SURPRISES WHEN YOU INSTALL.... ANY NEW ISSUES YOU MAY RUN INTO PLEASE LET ME KNOW SO I CAN SHARE WITH OTHER JEEPERS.......
ALSO SOME 1987-1990 WRANGLERS HAD A SKID PLATE WITHOUT A HEAT SHIELD OVER THE EXHAUST PIPE & WE RECOMMEND REPLACING THE SKID PLATE FOR SAFETY REASONS ALONG WITH A FILL & VENT HOSE TO RESOLVE ANY FIT ISSUES (YOUR OLD HOSES MAYBE DRY & NOT FLEXIBLE ANYMORE). IF YOU HAVE A BODY LIFT OF 3+ INCHES I HAVE LONGER HOSES AVAILABLE SO YOU DON'T NEED TO CUT TO EXTEND DUE TO THE LIFT.
SELLING A REPLACEMENT FUEL GAS TANK FOR THE JEEP WRANGLER YJ
THIS REPLACES THE FACTORY TANKS THAT TEND TO CRACK OVER TIME
THESE TANKS ARE MADE HEAVIER THEN STOCK FACTORY TANKS & MADE IN THE USA
20 GALLON FUEL CAPACITY
COMES WITH 2 NEW TOP HOLD DOWN STRAPS
BRAND NEW 20 GALLON POLY POLYETHYLENE PLASTIC FUEL GAS TANK
FITS THE JEEP WRANGLER YJ FROM 1987-1995 WITH THE 20 GAL FACTORY TANK.
FITS WITH OR WITHOUT FUEL INJECTION
WILL NOT RUST.... GUARANTEED
USA MADE & MADE FOR THE USA MARKET TANKS, NOT FOR EXPORT JEEP WRANGLERS
NO WELDS OR SEAMS TO FAIL OR LEAK
NEARLY 1/4" THICK
HAS BEEN TESTED TO 160 DEGREES BELOW ZERO AGAINST CRACKS
AKA
52002633, 52002633PL & 17722.23
SHIPPING IS FREE TO THE 48 STATES.... BUT IF RETURNED THERE IS A .00 RE-STOCKING CHARGE... PLEASE MAKE SURE YOU UNDERSTAND & READ MY COMPLETE DESCRIPTION OF THIS TANK.....
ALASKA, HAWAII, GUAM, USVI &
PUERTO RICO
PLSE EMAIL FOR RATES BEFORE PURCHASE
NOTE:  SHIPPING THIS TANK TO PUERTO RICO RUNS 0.00... IT'S NOT FREE - FREE IS TO THE 48 STATES BY GROUND TRANSPORT.
INCLUDES TANK, GASKET FOR SENDER & 2 TOP HOLD DOWN STRAPS
IF NEEDED YOU CAN ADD A NEW SENDING UNIT / FUEL PUMP COMBO FOR ONLY 9.00 (SQUARE HOLE)
CAN ADD NEW FILLER HOSE & VENT HOSE .00, JUST LET ME KNOW RIGHT AFTER PURCHASE & CAN BE ADDED TO ORDER. PLEASE DO THIS BEFORE YOU PAY SO I CAN ADJUST INVOICE.
SEE MY LISTING #
380955555391
THAT HAS THIS TANK WITH GROMMET SEALS &
VALVE
IN 1 KIT.
SEE MY LISTING #
362549519493
THAT HAS THIS TANK WITH NEW HOSES
ALSO NEED A SKID PLATE & SENDING UNIT??? SEE MY LISTING #
380859905465
NEED NEW FUEL TANK VAPOR VALVES & SEAL GROMMETS (THEY FIT IN THE ROUND HOLES ON TOP OF THE TANK, SEE PICTURE) ?? ADD 2 OF EACH TO THIS KIT FOR ONLY .00, 2 VALVES & 2 SEAL GROMMETS. NO ADDITIONAL SHIPPING IF INCLUDED & SHIPPED WITH THIS TANK. MUST PURCHASE AT SAME TIME AS TANK. CONTACT ME IF YOU HAVE ANY QUESTIONS......... OR SEE MY LISTING #
380955555391
REPLACES THE ORIGINAL PLASTIC TANK IN THE WRANGL
ER YJ FOR USA MARKET MADE JEEPS. WILL NOT FIT THE JEEP WRANGLERS MADE FOR EXPORT (
UNLESS YOU REPLACE SKID PLATE & SENDING UNIT
).
DIRECT REPLACEMENT FOR DOMESTIC PART NUMBERS 52002633 & 52018287
NOT A DIRECT REPLACEMENT FOR PART NUMBERS 52018779, 52007258 (call if you have this number) OR 52002622
(
UNLESS YOU REPLACE SKID PLATE & MODIFY SLIGHTLY & REPLACE THE SENDING UNIT
)
This tank will
NOT
directly replace model #'s 52018779, 52019226, 52007258 (had a recent customer with this number & they stated it fit perfect then another with same number had to use 1" spacers on the skid plate and salvaged the old skid. His sender fit with no issues) or 52002622 - a new skid plate and sending unit are required.
As you can see we have such headaches with this tank....  If you have #52007258 it's a crap shoot on fit.
Have questions?? I'm sure you do... 8479715223 & will try to answer them
THE EXPORTS ARE FINDING THEIR WAY BACK TO THE USA or the Jeep book is really screwed up & I think the latter. I HAVE HAD 2 RECENTLY. CHECK THESE NUMBERS. MY TANK WILL REPLACE THESE TANKS BUT YOU ALSO NEED A NEW SKID PLATE AS THE EXPORT MODELS ARE MADE DIFFERENT. ALSO THE SENDER TUBE IS LONGER ON THE EXPORTS & NEEDS MODIFICATION. CALL ME FOR DETAILS.......
JEEP USED DIFFERENT MFG TO MAKE THE TANKS & SKID PLATES & EACH WAS DIFFERENT IN SMALL WAYS. EVERY DAY WE SEEM TO FIND ANOTHER PROBLEM WITH FIT. LAST COUNT WAS 8 DIFFERENT MFG. AGAIN WE WANT TO GET IT RIGHT BUT THERE HAVE BEEN ISSUES WE WANT YOU ALL TO KNOW ABOUT. BEEN WITH JEEP FOR 40 YEARS & AM LEARNING MORE EACH DAY. LEAVE IT TO JEEP TO SCREW A SIMPLE GAS TANK UP.
THESE
NUMBERS ARE MOLDED ON THE TOP OF THE TANK
THE PROBLEM WITH FIT SEEMS TO BE HOW IT LAYS IN THE SKID PLATE. IF REPLACING THE RUSTED SKID PLATE WITH MY NEW SKID PLATE THIS TANK WILL FIT THOSE APPLICATIONS.
FITS EITHER THE 20 OR 15 GALLON PLASTIC. IF METAL SEE BELOW.
WILL REPLACE THE 14.5 OR 15 GALLON METAL TANK IN THE 1987-1990 MODEL YEARS USA MARKET BUT NEED ALL THE NEW HOSES, SENDER & FUEL PUMP & SKID PLATE. PACKAGE RUNS ABOUT 9.00, SUBJECT TO CHANGE)
ALL STATE 4WD
EMAIL IS
jeepparts at att dot net
8479715223 phone # r
FOR ??? QUESTIONS
ILLINOIS RESIDENTS ADD STATE SALES TAX
xxxxxxxx phone # removed per ebay policy
PICK UP AVAILABLE & ASK FOR DISCOUNT USING CREDIT CARD & CASH
PICK UP AVAILABLE
I WILL ADD CUSTOMER INFO WHEN I RECEIVE IT. PLSE SEND SO OTHER KNOW OF ISSUES WITH FIT & MODS NEEDED. THIS IS THE ONLY TANK SO SOME NEED MODS TO INSTALL
yes I do still have the old tank but cant see any numbers on it.
I did however need to move tank to left in the skid plate about an inch.....so that fill tube hoses would reach.
Also added 1" square tube to top front and rear outside edge of skid plate drilled holes to match original pattern and used longer bolts. Also used longer bolts for straps as the ones supplied won't reach with original skid plate. it is a 1989 islander version with 4.2 L